Find answers to your questions. Ask the Community for help or hire someone to help you.
Hello, we have submitted a form and files are uploaded on google drive. Now we have added a file sharing in our zap and the zap is successfully triggered and email is also sent with sharing link. Now i m manually triggering the zap from my code using the hook so i want that google drive sharing link in my response So can you please let us know how can i do that as i need to manually send an email with wooocmerce order details + google drive link. Also can you please let us know can i get any information from response id Please help us asap. Let us know if any details needed.
I’ve created a Zap which turns Typeform entries into a document. it roughly looks like this: new typeform entry > send data to google sheet for formatting > create doc from typeform & sheets outputs > create & send to new folder When i run a task to edit a google sheet which has been created in the zap (e.g 1.create sheet > 2.edit sheet that’s been created) it edits the original google sheet used to create the zap rather than the new one which has been created. This happens on 2 separate google sheet tasks. This is also happening in the create & send to new folder section. A new folder is being created, but the folder that was referenced to initially create the zap is now the folder where the files are being sent to, rather than the new folder. To be clear, this happens when the zap automatically runs. If you click ‘Test & Review’ everything works fine. This has never been a problem for me before. I thought that when you make a zap, zapier knows the
If I am posting data from an ActiveCampaign automation to a webhook endpoint, in Zapier should I use ActiveCampaign’s trigger, “New Automation Webhook in ActiveCampaign” or should I use the Zapier Webhooks trigger, “Catch Hook?” Would there be any functional difference between the two?
Hello! Thank you for your service, it makes life easier! We’ve set up automation where data is sent from Google Calendar to SpreedSheets. Unfortunately, there is an issue when the description of the event from the calendar pulls into a table. Below is a photo of how it looks. Could you please solve the problem so that the text is immediately pulled up without unnecessary characters.
the title says it all. I’d like data in an Airtable base to be sent to a graph generator, & from their populate a google doc with the graph. Can this be achieved with a custom field? What Zapier integrated platforms would you suggest for visually representing data? if not possible on Zapier, i’m happy to discuss genius off platform work arounds! thanks! :)
Hi, I’m working on a software that would generate some user data. My clients are asking if the data can flow into their CRM software automatically. I’m thinking of creating a Zap whereby I email them the data in a certain formatted way and their CRM app will be the receiving end. Thereafter I’ll share the zap with them so that they can sign-in their CRM for this to work? Will this work? Thanks for any help!
Hi, I am currently using a Apify to generate a dataset consisting of 3 URL’s in the format of “url-string1, url-string2, url-string3”. I am trying to feed these three URL’s into an email as hyperlinks such as: <a href=”url-string1”>Link1</a> <a href=”url-string2”>Link2</a> <a href=”url-string3”>Link3</a> I split the 3 hyperlinks into line items with the comma as the separator using Formatter by Zapier » Text » Split Text and it produces 3 line items. From there, I have attempted to try to convert the line items to markdown and then replace some of the html with what I need but it is losing ampersands and some other characters in the markdown conversion so the URL’s break. Any ideas on how I could make a clean conversion of the 3 URL’s into hyperlinks? Thanks in advance!
I need help creating zaps to connect Squarespace orders and Hubspot. I created zaps myself but there is no task generated. Contact me [via direct message] to discuss the issue and your pricing. Email address removed by a moderator - please do not include personal or private information in your posts.
I am new to Zapier, but I have been in IT for 25 years, so I have a good understanding of logic and process flow. I have a zaps that connects Cognito Forms and Citrix Sharefile. A user submits a form on Cognito Forms, the form includes 11 individual fields where they would upload a file while filling out the form. Not every one of those 11 fields is required and not every one of those 11 fields will have an uploaded file. When the Zap comes across a field that does not include a file I get the error message “Required field "File" (Filedata) is missing.” which is expected. After I get so many my Zap turns off, which is also expected. I need help configuring the zap to first look to see if a file exists, and if it does exist, upload it to Sharefile, if it doesn’t exist, move on to the next step in the Zap without generating an error. Is this even possible? I thought I had a solution using Paths, but I have more fields than the 3 paths and 3 nested paths allow. I thought maybe I could
Hello, I’m trying to configure a Zap that allows me to send an answer when someone send me a private direct message. Scenario: Bill send me a direct message (so not in a channel) and I want that when this event happens, automatically Zapier send to Bill an answer. E.g: “Sorry Bill, but Mirko is not in office right now, can you call him to phone 123456789?” I’m using the event “New Message Posted to Private Channel in Slack” and as channel I have typed my username as custom value. In this way it’s like I say to Zapier “when someone write me do this...”. Then I have added the filter about the Bill’s User Id and in the section “Do this...” I have configured the event “Send direct message”. The problem is that the event is not triggered and Zapier throws the error “ Error from Slack: channel_not_found”. How can I configure a Zap that allows me to do what I have wrote in the Scenario?
Is there a way to setup a zap that creates a pdf of specific airtable views (or by URL list) on a weekly schedule and saves it to Dropbox (or other cloud storage location)? Trying to automatically create PDFs of project list views for weekly team meetings. Thanks in advance, Fritz
I’m trying to figure out how to create a Zap. When a contact enters their info in my Click Funnel I want that contact to be sent to Follow Up Boss. I tried to set it up and now my Zapier account says I used up 601 tasks!! Please help! I’m happy to pay someone to show me how to do this or set it up for me.
Hi, I have a custom question in Zoom that I would like to transfer over to ActiveCampaign. I’ve used the Formatter by Zapier method to pull out the information I need but this only seems to work if I manually push it through a test in my Zap. It also shows the correct data is being pulled but when I enter it via the Zoom webinar sign up, reviewing the task history shows that nothing is being pulled and the field is blank. Currently the output from Zoom is in this format: [, , , ] Please help! Thank you!
Hello! I have a question regarding a request I’m making to an API via webhooks. Everything is working correctly, and I’m given the response I expect - Hooray! The response Zapier gives me is a beautiful, magnificent array of objects in exactly the format I need. as follows: An array of objects - Columns and values. This is exactly what I need, and when inspecting this response I see that it is being given to me exactly how I need it. But for some maddening reason, when I go to use this array in a code step, Zapier garbles it all up into two non-descript strings, which breaks everything. Has anyone come across this before? What can I do to either retain the response from the API or re-build it? Sadly it’s not as simple as using String.split(‘,’) in this case because column 2 has a tonne of unescaped commas, that I basically can’t handle as they follow no pattern.
Hi Zapier Community, I am using an update zap to update stock quantity in wooCommerce (feeding data from a google sheet), but this is not working properly. It seems if the quantity is a number that has never been used before the zap will trigger an update, but if the stock levels return to previous levels, the zap will not trigger again. My assumption is that when a change has been triggered on a row, this should trigger a zap regardless if the quantity number has been used previously or not. What is happening and is there a solution to this? Thank you, Nick
Log in to the Community
Use your Zapier credentialsLog in with Zapier
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.