Find answers to your questions. Ask the Community for help or hire someone to help you.
I have a zap to get data from a Twitch channel to make a embed post on Discord with a webhook.It gets the title automatically, but if the streamer uses quotation marks, it pases raw to the code (instead of \”) and the post fails.Zap codeError because quotation marksPD: sorry for bad english and little error on title
Hello everyone,I'm looking to create a zap including Google Sheets and Send Email. The first one is a table in which the production status of the different jobs we are working on are regularly added. For example : When we have a new job, we add a line from the top. The most recent job is insert at the top. I would like to do the following zap: When a cell "In progress" in column B is changed to "Done" send an email to the team. The problem I have:When someone adds a new job by inserting a row from the top, all my rows shift down. Zapier considers that all the lines with the mention "Done" that have shifted down are updated and so it sends me as many emails as lines present in the document. Do you have any idea how I can tell it "Trigger" only when In progress is changed to Done and not when we add a new line and the lines shift down. Thanks for your help.Sophie
Hello - I created a Zap to connect RingCentral to TrelloI want to be able to text various Tasks through RingCentral and that would Trigger creating a New Card in a specific List and Board in Trello every time. Like a to-do list but instead Tasks from our Agents for the Admin team to work on. Please help.
I created a zap at one point that used the trigger “Pushed message from Slack”. I have since re-done that zap and done what I needed another way, the trigger is no longer a pushed message from Slack however that zap is still showing up in my “Zap to trigger” options within Slack. I have tried turning on and off the zap as well as completely closing and reopening Slack but the zap continues to show up even though it no longer utilizes the “pushed message” trigger. The attached photo is from Slack and shows the zaps I have to choose from to push a message to….the top one “Slack to Asana FCA Social Media Photos” is not set up to receive pushed messages and should therefore not even be showing up but for some reason I can’t get it to go away (I really don’t want to delete it and rebuild it). The zap itself works totally fine the way I want it to but it just seems this old part is stuck in Slack. Thanks for any help
Can u please help me? I have a lot of a newspaper websites and I want to share thew same news or post in the different sites, but I have a problem with the content of the entry or post, and the media too. I don´t know how to set up the action.
Another question I created a zap with Paypal and Sendinblue, I created on my Sendinblue a “thank you mail” after someone buy a product, but I don’t see any option to implement my mail to the zap, the only option I can see is send transactional mail or add or update a contact.have you any experience to send an automation via zapier after someone pay via Paypal?
I want to add comma separated data from webhook to separate columns in Google sheet.The value sent from Typeform is, for example: “FULL BODY, HOUSE, 1,” To do this, I first split the comma-separated data into lines with text to line-item. And the output looks fine: Then, when I want to add the output to separate fields in the Google sheet, it still appears separated by commas. How can I solve this?
HI, I am using the NationBuilder “Update a Person” action and it will not remove tags. It will add tags but will not remove them from NationBuilder. (Don’t ask me why)I have found another action that is to “Delete a Single Tag” from a NationBuilder person. I can compare data in/data out on the “Update a Person” action to see if the tags match (hopefully, might get caught out by order but … later)So, is there any way, with a zap, to cycle through those 2 lists of tags to determine what tags are missing from the input list that are on the NB output list. Those tags are the ones I would then need to (one by one) delete.So I need 2 things:A list comparison to find the missing tags and An iterator to perform a delete tag task on each missing tagOkay - so now I try with Zapier Looping…Read the list of tags from NB (returned from update), loop through each tag, if not in the list of tags from Amalfi then delete the tag from NB… should be simple.The loop (line item or text? - both seem the sam
I have a Trigger from a Knack a no code platform and in the Data it sends the row contains Name some other information and then cities . It might have 1 city 3 cities 5 cities its different every time . Each city is always separated by a comma. So I my next step is to create a row in google sheets which I need to basically create a separate row with all the same data except for each with the different city in the triggered data. I am using this data for a lookup later in another Zap and doing a lookup in GSheets you cant lookup and find data in a column that as example Tampa if the city row contains for example Tampa, Orlando, Miami. So in my loop City was the loop field name and Address was my area field containing the 3 fields. It seemed to work correctly when testing and dropped 3 separate record into GSheets each with the different city. When I did it live it dropped 9 records so the 3 separate records with he 3 different cities times 3. Below is my loop,
Platforms I am connecting:Google Forms Google Sheet (Google Form Responses sheet) Shortcut - https://shortcut.com/ (it is a tool similar to Trello/Asana)What I am currently doingWhenever someone submits a Google Form, a new Card is created in ShortcutWhat I want to achieve but I cannotOnce the Shortcut Card is created, I want to add the permalink of this Card back to the row in the Google Sheet next to the response which was capturedI keep getting this Error: 'NoneType' object has no attribute 'get' I am trying to share the Zap but it doesnt allow me to share it as there is the above error in the Zap
Hello - Take us out of the Stone Ages Please! I am needing to get my pieces of software connected & some basic automation setup.We are a staffing agency, professional placements only. We market our jobs to prospects like a sales cycle basically. Emails, text messages with MMS would be nice, but if living the dream not capable then SSM.We want to use Dux-Soup to push data from LinkedIn Recruiter to Pipedrive CRM or any Zapier product that will automate our mass multiple emails & text multiple phone number in mass. Minimum we get 2 emails, 2 numbers. We were using Swordfish as well it’s a Zapier connection too, its produces’ 3-4 phone numbers and 3 emails – if a platform can manage it, we would like to keep using it. If I have to cut it loose, willing to do such.Data merging, if we pull in folks from Linkedin that are a 1st connection, Dux-Soup will push over contact data on profile, then we will have multiple contact data to merge into profiles.I have been advised by many
Hi guys,I need help with how to do such a zap/zaps: - i want a zap to track a private channel (Channel A), and when three posts have been posted in this channel, it will fire a message in (Channel B) The trick that i am facing is how to make it fire only after 3 or more posts? Thank you so much!
Hi team! My Wordpress → ActiveCampaign works when the visitor becomes a member of the site when they purchase something via WOOcommerce (Which automatically creates a wordpress user) But when the visitor creates an account manually via the “sign up” button - the first and last name fields are not sent to activecampaign and they are not added to a list Any fixes? As I’ve gotten Zapier for this one function
Had anyone seen this issue and have a fix or work around. I have 8 zaps that get this error. It worked fine for almost a year then developed this issue. It seems to pop up when the zap runs multiple times in a row. The first instance works but anything after that is stopped with this error. Zapier says it is a known issue but does not have a fix or work around or an ETA when they can even look at it.
Hey there!I’m looking for a Zapier Expert to help setup an automation between Keap and Shopify.The goal is for when an invoice is paid for, that Zapier creates an automation to automatically generate a new sale on Shopify whilst linking tax-free and tax-inclusive products.I’ve tried it myself, but have challenges setting it up correctly. Any help would be great!
I have data going to a Google Sheet spreadsheet, including one cell which has an email address.When the Sheets data changes, I would like to create an email and send it to the email address listed in that cell.When I do Sheets-to-Gmail Zap, I cannot identify the specific cell that contains the email address in the Gmail “to” zap.How do I go about accomplishing this?
Hi, I am trying to setup a zap that will automatically upload a document to Box.com and a specific folder when an email with attachments are forwarded to the unique zap email.I get the error: “The app returned "Not Found". “ when I test this zap. Here is my current setup, including a middle step to find the specific folder in Box I want to add the attachment to. Thanks in advance for any help you can provide!
Hi Zapier community, I am working on a solution for my team, where we are transposing information from Asana to SmartSheet using Zapier. I would like to transpose the assignee email address from a task in Asana to SmartSheet. When I try to setup the action, I do not see any dynamic content to input email address in SmartSheet (please see attached screenshot). Any suggestions?
Hi, I’m trying to figure out if there is a way to only send certain row data from a GoCanvas loop screen to Google Sheet based on a condition from another field.For example, I have data such as below. GoCanvas would typically pass this data by Column separated by a comma. e.g. “Was removed” = Yes,No,Yes : Was Removed Model Serial Number Yes A 123 No Yes B 345 I only want Zapier to send the Model and Serial number data IF “Was Removed” = Yes. i.e. Only send Google sheets Model A and Model B.My current ‘standard’ zap sends all three rows. I thought of using a filter between Gocanvas and Google Sheet, but that only appears to read the whole comma delimited data for a field. i.e Yes,No,Yes so always runs. Thanks.
Log in to the Community
Use your Zapier credentialsLog in with Zapier
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.