How to run multiple Zaps from one trigger

  • 3 June 2020
  • 3 replies
How to run multiple Zaps from one trigger
Userlevel 7
Badge +3
  • Zapier Staff
  • 21 replies

Mod Edit: 03-22-2022

Hi there!

Tim here from the Zapier Support Team with another workflow idea.


If you’re running into one of these problems, the Webhooks by Zapier app can help:

  • You want to Trigger multiple Zaps from the same Trigger, but your Trigger Zap doesn’t support creating as many Triggers as you need
  • You want to create more than three Paths after a Trigger

For example, I recently helped a customer who was trying to set up Zaps that Triggered from events in Stripe. Stripe only allows a maximum of 16 outgoing webhooks and they needed to Trigger more Zaps than that. Because the Trigger used for most of the Zaps was the same, we used this technique to “duplicate” the Trigger from one to about 20 different Zaps. Every time Stripe Triggered the Starter Zap we set up, webhooks would duplicate and Trigger the 20 Zaps with the same information. 

Setting up the Zaps

In this example, we’ll look at duplicating one Zap with the Trigger we want to three more Zaps.

Starter Zap:

  • Trigger: The Trigger we really want. For the sake of a simple example, we’ll use the Schedule by Zapier app, but this works with any Trigger.
  • Action: Webhooks by Zapier: POST

Zap 1:

  • Trigger: Webhooks by Zapier: Catch Hook
  • Action: Any Filter(s) or Action(s) we want

Zap 2:

  • Trigger: Webhooks by Zapier: Catch Hook
  • Action: Any Filter(s) or Action(s) we want    

Zap 3:

  • Trigger: Webhooks by Zapier: Catch Hook
  • Action: Any Filter(s) or Action(s) we want

Zap n (as many as we need):

  • Trigger: Webhooks by Zapier: Catch Hook
  • Action: Any Filter(s) or Action(s) we want

It may seem counter intuitive, but it’s easier to start with the Zaps we’re duplicating to. When you set up Zap 1, 2, 3, n, etc, with the Catch Hook Trigger, you’ll see this:

The “Custom Webhook URL” is where we’re going to send the Trigger data from the Starter Zap, so copy that URL by clicking “Copy” and note it somewhere like a text editor. 

When we create Zaps 2, and 3, notice that the URL is mostly the same, so for the additional Zaps that you want to Trigger, we only need the last bit that is different. Here’s Zap 2:

And here’s Zap 3:

Now we create the Starter Zap. Here’s our Trigger data that we want to duplicate to the other three Zaps from the Schedule by Zapier app:

Next, we add the Webhooks by Zapier POST Action to the Starter Zap. We want to combine the three URLs together like this:,os6v9ug,os6v9hy/
Note that we combined the unique parts at the end of each URL separated by commas. Here’s how it looks in the Zap: 

This is the only field that we need to fill out here. By leaving the “Data” fields blank, the Action will send all the data from the previous Step (the Trigger in this case) to the URL we specified.

Now, we can go ahead and test the Step:

If we go back to each of Zaps 1, 2, and 3 at this point, we can test the Trigger for each, and the data we sent from the Starter Zap will be pulled in. For example: 

As you can see, we have successfully duplicated the Trigger values from the Starter Zap to Zap 1. We can also go and test the Trigger for Zaps 2 & 3, and pull in the same data. From there, we can set up the rest of the Steps in our Zaps as needed.

Once the Starter Zap is turned on, it will cause all the Zaps that it is set up to POST to to Trigger as well with the same Trigger information.  

You can also read more about this in the help docs here:


Thanks for reading, and if you use this technique to solve a problem, or if you’ve used it before, I’d love to hear about your use cases in the comments below. If you have any questions using this, you’re welcome to ask below or write in to support for help.

3 replies

I have a question. My situation is I use “Catch a Hook” to transfer my form field inputs to google sheets. I would like to use the same webhook to send data to another applications which is Action Network. The idea being i want to add subscribers that  were put into the google sheets to also go into our subscribers at the Action Network site.  Using your technique I can create a new zap using the same webhook from the form and have the data go to the subscribers of the Action Network and google sheets?


Yours truly


Paul Newman

Userlevel 7
Badge +11

Hey @thepaulman, welcome to the Community! 

I think the original Zap that triggers from the form’s webhook would need to have an additional webhook step added that then triggers the new Zap to add the subscribers into Action Network. So, the new Zap wouldn’t use the exact same form webhook specifically. 

Alternatively, you could potentially just add the Action Network Subscribe Person action after the Google Sheet action in the original Zap. That way when the form triggers the Zap and adds the details into Google Sheets, the user will also be subscribed in Action Network without the need for a second Zap. Hope that helps to clarify! :)

Userlevel 1

I have a question as well. 

i have one zap setup connected via web hook with GoHighLevel. What this zap does it, every time we get a warm lead, it connects to the zap. And creates an item in my board.


i have another zap I’m creating #2. That whenever I get the email from the customer, which usually comes at a later time then zap #1 happening. 

i want it to update the email of that specific customer within our board.


Would I need to connect two zaps together in this instance talked about here to make this happen?